EPSON LX 300 II ESC SOFTWARE
EPSON LX 300 II ESC CODE
EPSON LX 300 II ESC PLUS

When you choose Off, the printer prints up to 225 cps at 10 cpi. When you choose On, the printer prints up to 300 cps (characters per second) at 10 cpi (characters per inch). The slash allows you to easily distinguish between the uppercase letter O and a zero. It has no slash (0) when this feature is turned off. The zero character has a slash ( ) when this feature is turned on.

EPSON LX 300 II ESC PLUS

When you select IBM 23 80 Plus (for LX-300+II)/ IBM 2381 Plus (for LX-1170II), the printer emulates an IBM printer. When you select ESC/P, the printer operates in the EPSON ESC/P mode. Printing is normally bidirectional for faster printing however, unidirectional printing allows for precise vertical printing alignment, which is useful for printing graphics. You can select bidirectional printing ( Bi-D) or unidirectional printing ( Uni-D). If the printer adds an extra line after every carriage return, select Off.

EPSON LX 300 II ESC CODE

When auto line feed is on, the printer accompanies each carriage return (CR) code received with a line feed code, and the print position moves to the next line. See Using the Tear Off button for more information. When auto tear off is off, you need to move the perforation to the tear-off position by pressing the control panel button. When the printer receives the next print job, it automatically moves the unused paper back to the top-of-form position and starts printing, so you can use all of the next page. When auto tear off is on and you are using continuous paper with the push tractor, the printer automatically advances the paper perforation to the tear-off position, where you can easily tear off the printed pages. Because the program margin settings in most applications override margin settings made from the control panel, you should use this setting only if you cannot set your top and bottom margins using your application. When you select On, the printer provides a one-inch (25.4 mm) margin between the last line printed on one page and the first line printed on the next page. This feature is available only when continuous paper is selected. This setting allows you to set the page length (in inches) for continuous paper. ** These settings take effect only when IBM 2380 Plus (for LX-300+II)/IBM 2381 Plus (for LX-1170II) emulation is selected. * The options available vary depending on the country of purchase. ItalicВ U.S.A., ItalicВ France, ItalicВ Germany, ItalicВ U.K., ItalicВ Denmark1, ItalicВ Sweden, ItalicВ Italy, ItalicВ Spain1ДЄuto CR (IBM 2380 Plus for LX-300+II, IBM 2381 Plus for LX-1170II)** International character set for Italic table For instructions on changing the default settings, see Changing default settings. The settings are explained in detail after the table.

The following table lists the default settings and the options you can select in the Default Setting mode.

EPSON LX 300 II ESC SOFTWARE

While you can often set these functions through your software or printer driver, you may sometimes need to change a default setting from the printer's control panel using the Default Setting mode. The default settings control many printer functions.

Epson lx 300 ii esc